features / benefits operating conditions mechanical dimensions individually controllable red, blue and green leds complete with heatsink housing comparable to mr16 size ability to create infinite numbers of colors or dynamic color changing effects easy retrofit to existing mr16 fixtures sub-lenses included for choice of light distribution long life of 50,000hrs at 70oc pcb temperature optimized thermal management no uv or ir available color kinetics pass through license, consult factory for details operating ambient temperature -10oc to +40oc maximum current 350ma diameter = 50.0mm (1.97) height =36.0mm (1.42), 37.5mm (1.48) with sub lens attached lead length = 150mm (5.91) hl16 rgb led light engine mdexlumhl16rgb_a dialight corporation 1501 route 34 south ? farmingdale, nj 07727 usa tel: (1) 732-919-3119 ? fax: (1) 732-751-5778 ? www.dialight.com dialight reserves the right to make changes at any time in order to supply the best product possible. application materials/finish dynamic color changing entertainment lighting accent lighting landscape lighting display cases anywhere mr 16 lamps are used die cast heatsink construction wide & micro sub-lenses included HL16-RGB part number associated cables rj45-con assy : connector assembly (1 required per hl-16 rgb) rj45-c : termination plug rj45-xlrm : rj45 male to molex male 100mm cable rj45-xlrf : rj45 male to molex female 100mm cable cdl-m3m : molex male to male 3m cable
dialight corporation 1501 route 34 south ? farmingdale, nj 07727 usa tel: (1) 732-919-3119 ? fax: (1) 732-751-5778 ? www.dialight.com dialight reserves the right to make changes at any time in order to supply the best product possible. hl16 rgb led light engine mdexlumhl16rgb_a wiring information electrical specifications power consumption = 3.6 watts maximum current = 350ma constant current compatible drivers typical led photometric data 179 x 53 x 32 mm x 110 - 240 v 6 color driver rf supply voltage x dimming 310 x 55 x 45 mm 4-12 colordriver 36 dimensions maximum number of hl16s connected model 110 - 240 v results are led manufacturers test data @ 25oc jtc. light output at 55oc pcb temperature will be approximately 15-20% lower. elevated temperatures will result in further degradation of light output. for maximum performance use appropriate heat sinking .
|
